RM C, 13 / F, XÂY DỰNG THƯƠNG MẠI HARVARD, 105-111 THOMSON ROAD, WAN CHAI, HK
Nhà Sản phẩmThiết bị kiểm tra an toàn điện

Customized Electrical Safety Test Equipment Temperature Measurement Test Corner

Customized Electrical Safety Test Equipment Temperature Measurement Test Corner

    • Customized Electrical Safety Test Equipment Temperature Measurement Test Corner
    • Customized Electrical Safety Test Equipment Temperature Measurement Test Corner
  • Customized Electrical Safety Test Equipment Temperature Measurement Test Corner

    Thông tin chi tiết sản phẩm:

    Place of Origin: China
    Hàng hiệu: KingPo
    Chứng nhận: Calibration Certificate

    Thanh toán:

    Minimum Order Quantity: 1
    Giá bán: To be quoted
    chi tiết đóng gói: gói thùng carton an toàn hoặc hộp ván ép
    Payment Terms: T/T
    Liên hệ với bây giờ
    Chi tiết sản phẩm
    Standard: IEC60335-1:2004 chapter 11 thermocouple: K, T, J type(optional)
    sheet copper φ: 15mm sheet copper thickness: 1mm

    Electrical Temperature Measurement Test Corner

     

    IEC60335-1:2004 Electrical Appliance Tester Temperature Measurement Test Corner

     

    Product information:

    The temperature measurement corner conforms to the standard requirement of IEC60335-1:2004 chapter 11. It is designed and manufactured to provide the required environment for the temperature rising test of all kinds of electrical, electrical products. It can be customized according to the different testing samples.

     

    Technical parameters:

    1. Size: 600X600X1000mm,800X800X1000mm,1000x1000x1200mm(it can be customized)

    2. Thermocouple: the diameter of the thermocouple is less than 0.3mm. There are three kinds of the thermocouple: K, T, J (any one of it can be chosen)

    3. The thermocouple arrangement: All leads on a connection line(optionally equipped with thermocouple plug and socket)

    4. The sheet copper used for temperature measurement: the diameter of 15mm and the thickness of 1mm.

    5. The number of temperature measuring points:20,32,48,64(it can be customized)

    6. The arrangement of temperature measuring points:100*100mm or 76*76mm square(it can be customized)

    7. Plywood:The thickness is 20mm and the front side is painted with Berlin black and the reverse side is with gray film back.

    8. The movable part: there are 4 removable wheels installed on the bottom of the device.

    9. The height of the wheel is about 100mm. The top plate is equipped with hook whose load bearing is 15Kg.

    10. Temperature patrol system needs to be equipped additionally

    (optionally equipped with 48 road tour temperature table)

     

    Chi tiết liên lạc
    KingPo Technology Development Limited

    Người liên hệ: Lynette

    Gửi yêu cầu thông tin của bạn trực tiếp cho chúng tôi (0 / 3000)

    Sản phẩm khác