RM C, 13 / F, XÂY DỰNG THƯƠNG MẠI HARVARD, 105-111 THOMSON ROAD, WAN CHAI, HK
Nhà Sản phẩmĐèn nắp đậy

GX53 Lamp cap gauge | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1

GX53 Lamp cap gauge | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1

GX53 Lamp cap gauge  | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1

Thông tin chi tiết sản phẩm:

Nguồn gốc: trung quốc dongguan
Hàng hiệu: kingpo
Chứng nhận: iso9001 iso17025
Model Number: 7006-142E-1

Thanh toán:

Minimum Order Quantity: 1
Giá bán: To be quoted
chi tiết đóng gói: gói thùng carton an toàn hoặc hộp ván ép
Thời gian giao hàng: 7 ngày làm việc
Payment Terms: T/T
Khả năng cung cấp: 1000 tính mỗi tháng
Liên hệ với bây giờ
Chi tiết sản phẩm
Hàng hiệu: Kingpo Model Number: KP-7006-142E-1
Material: Hardness Steel Standard: IEC60061-3

 

GX53 Lamp cap gauge | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1

 

PURPOSE: PURPOSE: To check caps GX53-1 in the following respects:
- correct keyway position in relation to cap pins;
- the minimum height and width of the keyway (dimensions W and X2);
- to prevent the possibility of insertion of only one pin.


TESTING: It shall be possible to insert the cap into the gauge until the reference plane of the cap is in contact with surface Y of the gauge. It shall then be possible to turn the cap into contact position.
It shall not be possible to insert only one pin of the cap into the gauge and turn the gauge into contact position.

GX53 Lamp cap gauge  | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1

Related gauges for GX53

 

7006-142-1
"GO" AND "NOT GO" GAUGE FOR CAPS
GX53 PURPOSE: To check caps GX53-.. in the following respects:
- the diameter of the individual pins (dimension A);
- the combined displacement and diameter of the pins (dimensions A and D);
- the length of the pins (dimension F1);
- the recess length and diameter of the pins (dimensions F2 and E);
- the maximum cap outline with respect to dimensions M, L1 and K.
7006-142D-1
"NOT GO" GAUGE FOR CAPS
GX53 PURPOSE: To check the minimum cap diameter (dimension L1) of caps GX53-..
7006-142E-1
"GO" AND "NOT GO" GAUGE FOR CHECKING
KEYWAYS IN CAPS
GX53 PURPOSE: To check caps GX53-1 in the following respects:
- correct keyway position in relation to cap pins;
- the minimum height and width of the keyway (dimensions W and X2);
- to prevent the possibility of insertion of only one pin.
7006-142F-1
"NOT GO" GAUGE FOR CHECKING KEYWAYS IN CAPS
GX53 PURPOSE: To check the maximum keyway width (dimension X) of caps
GX53-..

Chi tiết liên lạc
KingPo Technology Development Limited

Người liên hệ: Ms.Lynette Wong

Gửi yêu cầu thông tin của bạn trực tiếp cho chúng tôi (0 / 3000)

Sản phẩm khác