logo
Gửi tin nhắn
các sản phẩm
Chi tiết sản phẩm
Nhà > các sản phẩm >
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety

IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety

MOQ: 1
giá bán: To be quoted
bao bì tiêu chuẩn: hộp dụng cụ bằng nhựa hoặc gói ván ép
Thời gian giao hàng: 35 ngày làm việc
phương thức thanh toán: T/t
Khả năng cung cấp: 200 mỗi tháng
Thông tin chi tiết
Nguồn gốc
Trung Quốc
Hàng hiệu
kingpo
Chứng nhận
ISO 17025
Số mô hình
IEC 61347-1:2024 Phụ lục H
Làm nổi bật:

IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment

,

0.5 N ± 0.1 N Force Electrical Safety Tester

,

1.25 Times Test Value IEC 61347-1 Test Electrode

Mô tả sản phẩm
IEC 61347-1:2024 Annex H Insulating barrier test ,Figure H.1 – Test electrode
H.1 General requirements
Solid insulation in direct contact with sharp edges of live parts of printed circuit boards used below a printed circuit and that are used to fulfil the requirements for double or reinforced insulation shall be tested according to Clause H.2 to simulate the stress produced by the soldered part in the printed circuit board.
H.2 Insulating barrier test
The insulating material used to fulfil the requirements for double or reinforced insulation shall be placed between two opposing electrodes. One electrode shall be a flat brass or stainless-steel surface that is placed in contact with the surface of the insulation material to be tested.
The second electrode consists in a cylindrical brass or stainless-steel rods with shape and dimensions according to Figure H.1 .
The electrodes shall be pressed against the insulation material with a force of 0,5 N ± 0,1 N.
The test potential between the two electrodes shall be increased to the test value and the maximum test potential shall be maintained for 1 min. The test value shall be 1 ,25 times the value for double or reinforced insulation as in Table 10.
No flashover or breakdown shall occur during the test.
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety 0
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety 1
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety 2








các sản phẩm
Chi tiết sản phẩm
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety
MOQ: 1
giá bán: To be quoted
bao bì tiêu chuẩn: hộp dụng cụ bằng nhựa hoặc gói ván ép
Thời gian giao hàng: 35 ngày làm việc
phương thức thanh toán: T/t
Khả năng cung cấp: 200 mỗi tháng
Thông tin chi tiết
Nguồn gốc
Trung Quốc
Hàng hiệu
kingpo
Chứng nhận
ISO 17025
Số mô hình
IEC 61347-1:2024 Phụ lục H
Số lượng đặt hàng tối thiểu:
1
Giá bán:
To be quoted
chi tiết đóng gói:
hộp dụng cụ bằng nhựa hoặc gói ván ép
Thời gian giao hàng:
35 ngày làm việc
Điều khoản thanh toán:
T/t
Khả năng cung cấp:
200 mỗi tháng
Làm nổi bật

IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment

,

0.5 N ± 0.1 N Force Electrical Safety Tester

,

1.25 Times Test Value IEC 61347-1 Test Electrode

Mô tả sản phẩm
IEC 61347-1:2024 Annex H Insulating barrier test ,Figure H.1 – Test electrode
H.1 General requirements
Solid insulation in direct contact with sharp edges of live parts of printed circuit boards used below a printed circuit and that are used to fulfil the requirements for double or reinforced insulation shall be tested according to Clause H.2 to simulate the stress produced by the soldered part in the printed circuit board.
H.2 Insulating barrier test
The insulating material used to fulfil the requirements for double or reinforced insulation shall be placed between two opposing electrodes. One electrode shall be a flat brass or stainless-steel surface that is placed in contact with the surface of the insulation material to be tested.
The second electrode consists in a cylindrical brass or stainless-steel rods with shape and dimensions according to Figure H.1 .
The electrodes shall be pressed against the insulation material with a force of 0,5 N ± 0,1 N.
The test potential between the two electrodes shall be increased to the test value and the maximum test potential shall be maintained for 1 min. The test value shall be 1 ,25 times the value for double or reinforced insulation as in Table 10.
No flashover or breakdown shall occur during the test.
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety 0
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety 1
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety 2