 |
G13 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G13-7006-44-4
Thông tin chi tiết sản phẩm:
| Nguồn gốc: | trung quốc dongguan |
| Hàng hiệu: | kingpo |
| Chứng nhận: | iso9001 |
| Model Number: | 7006-44-4 |
Thanh toán:
| Minimum Order Quantity: | 1 |
|---|---|
| Giá bán: | To be quoted |
| chi tiết đóng gói: | gói thùng carton an toàn hoặc hộp ván ép |
| Thời gian giao hàng: | 7 ngày làm việc |
| Payment Terms: | T/T |
| Khả năng cung cấp: | 1000 tính mỗi tháng |
|
Thông tin chi tiết |
|||
| Hàng hiệu: | Kingpo | Material: | Hardness Steel |
|---|---|---|---|
| Standard: | IEC60061-3 | HRC: | C58 to C60 |
| Làm nổi bật: | Iec 60061 3,Go And Not Go Gauge |
||
Mô tả sản phẩm
G13 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G13-7006-44-4
Purpose: to check dimensions E min., E max., F min., G max. and the combined pin diameter and displacement of pins(including bosses) of unmounted bi-pin caps G13.
Testing: the pins of the cap shall enter the gauge at surface O and, when fully inserted, the surfaces of cap and gauge shall contact. In this position the ends of the pins shall be co-planar with or project beyond surface X. Each individual pin shall enter the hole e2 until the boss of the pin and the surface of the gauge contact, but they shall not enter hole e1. The boss of the individual pin shall enter hole b at surface O until the surface of the cap and the gauge contact.
Related gauge:
| "GO" GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G13, 7006-45-4 |